1. ANTENNAS

Correct antenna selection can help define the direction & radiated power to the desired coverage area.

2. POWER LEVELS

Reducing power to smaller coverage areas, or “cells”, can increase throughput & prevent interference with surrounding AP’s.

3. CHANNELS

Use of the 5Ghz band instead of 2.4GHz, provides improvements with useable non-overlapping channels along with higher supported throughput rates. For high density environments 40Mhz or 20Mhz channel widths should be used, to allow for increased device count per AP.

4. UTILISATION

Air time utilization is how long devices are consuming the available radio bandwidth for. Dependent upon the end-user requirements, common maximum limits would be 70% for data alone, 60% for video and 50% for voice.

5. DATA RATES

By removing lower legacy supported data rates from newer Wi-Fi Standard AP’s, this will speed up transfers & the available airtime for ALL users. Setting a minimum data rate to 24 or 36Mbps is common.

6. LEGACY SUPPORT

2.4GHz devices are limited to three non-overlapping channels, but will allow around double the coverage area. Up to two thirds of any dual AP’s offering both 2.4 / 5Ghz should have the legacy radio turned off to prevent co-channel interference in dense deployments.

7. FRAGMENTATION AND AGGREGATION

In high-speed wireless, multiple packets are aggregated into and transmitted in a single large frame. If errors occur during transmission, only the corrupted fragments of the frame are retransmitted. By adjusting the fragmentation size, throughput efficiencies can be gained.

8. QOS MULTIMEDIA EXTENSIONS

WMM (Wi-Fi Multimedia) allows time sensitive applications to be given a higher priority over the Wi-Fi medium. Applications in decreasing order of priority are, Voice, Video, Best Effort & Background.

9. NON-WI-FI INTERFERENCE

Unlicensed band interference from microwaves, baby monitors, wireless cameras, Bluetooth, cordless phones etc. Spectrum analysis will help identify the source of the interfering hardware.

10. HIGHER LEVEL PROTOCOL

Wi-Fi is simply the medium for connecting resources together. Issues with applications often lie in misconfiguration of the layers in between. By using a protocol analyzer to capture data packets, it enables you to drill down the network OSI model layers & pinpoint the root cause of an issue.

If you need further help setting up or configuring your wi-fi for your office, school, university, or building, check out Syndeticom’s wi-fi and surveys services.

The post 10 Factors Affecting Your Wi-Fi Performance first appeared on Syndeticom.

The post 10 Factors Affecting Your Wi-Fi Performance appeared first on Syndeticom.

1. Headsets

If you are working from home, the last thing you want is a wired headset. Or—worse—trying to use your mobile phone while typing on your laptop. You need to be mobile and hands-free. Take a look at some of our headset options right here.

2. Video Conferencing

Stay connected with your team-mates and join meetings virtually. Video Conferencing allows that essential face-to-face time with colleagues while everyone is working from home, plus it allows you to keep your business going by turning any external meetings into virtual ones. Yet video conferencing doesn’t have to be difficult to set up, nor cost money to enable. There already is a free, easy-to-use platform available right now, and you could be hosting a meeting in just a few clicks.

8×8 Meetings. Anytime, Anywhere.

If you need a fast, easy and free video-conferencing option, then look no further. 8×8 is a tried and tested platform, used globally by more than 1 million business users.

Anyone can join an 8×8 meeting, even if they aren’t 8×8 users. Invite customers, collaborators and external partners to virtually meet at any time for free!

• Join via smartphone, online browser or conference room phone
• Call into meetings using dial-in numbers
• Jump into meetings without downloading an app

8×8 includes voice, video, chat and contact centre, so there’s just one platform handling all of your communication needs. Watch the video below to see how easy it is:

Jump into 8×8’s free online meeting portal and start meeting virtually with your team today.

Start Video Conferencing 

For longer-term more robust Video Conferencing or Remote Contact Centre models please contact our team:

sales@syndeticom.com.au

SYDNEY & CANBERRA: (02) 9430 9871

MELBOURNE: (03) 8375 7191

The post Your Fast-Start Solution to Working From Home first appeared on Syndeticom.

The post Your Fast-Start Solution to Working From Home appeared first on Syndeticom.